pH值对Bi_2MoO_6晶体形貌和可见光催化性能的影响

以(NH4)6Mo7O24·4H2O和Bi(NO3)3·5H2O为原料,采用普通水热法制备Bi2Mo O6光催化剂,研究p H值对制备该光催化剂的影响。对所制备的系列样品,采用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、比表面积分析仪、X射线光电子能谱仪(XPS)和紫外-可见漫反射(UV-Vis DRS)进行表征。结果表明:p H值对Bi2Mo O6晶体的物相组成、形貌和光催化性能均有显著影响。p H值为1~7时,所制备的样品为纯相Bi2Mo O6,p H值为9或11时,出现第二相Bi3.64Mo0.36O6.55;随着p H值的升高,形貌依次为纳米棒、纳米片和无规则纳米颗粒。在可见光(λ≥420 nm)照射下,通过光催化降解罗丹明B(Rhodamine B,Rh B),探讨了制备Bi2Mo O6的p H值对其可见光催化活性的影响。当p H=7时,制备的样品光催化效果最好,光照50 min后对初始浓度为5 mg·L-1的罗丹明B溶液的降解率为85%。     

橙红色荧光粉Ca_(1-x-y)Sm_xBi_ySiO_3的制备及其发光性能

以Sm3+作为激活剂,Bi3+作为辅助激活剂,采用水热法合成Ca1-x-ySmxBiySi O3前驱体,然后在1 100℃焙烧得到系列橙红色荧光粉。用X-射线衍射仪、扫描电镜和荧光分光光度计和傅里叶变换红外光谱等手段对样品的组成、结构和形貌及其发光性质进行分析和表征。分析结果表明:产物都为三斜晶系结构的Ca1-x-ySmxBiySi O3和四方结构的方石英Si O2共熔体。在405 nm近紫外光激发下,产物的发射光谱由3个峰组成,发射峰值位于566、606和650 nm处,分别归属于Sm3+的4G5/2→6HJ/2(J=5,7,9)跃迁。产物的激发光谱在405 nm有很强的发射带,与近紫外LED芯片匹配。随着Sm3+掺量的增加,样品发光强度先增强后减弱,当Sm3+的物质的量分数为3%时发光强度达到最大,浓度猝灭机理为电偶极-电偶极相互作用。当Bi3+的物质的量分数在0.3%~1.5%时,对产物Ca0.97Sm0.03Si O3的荧光强度起敏化作用。Sm3+和Bi3+的最佳物质的量分数分别为3%和0.5%。     

异质结Bi_2WO_6/ZnO复合光催化剂的制备及其光催化降解含酚废水的研究

采用水热法制备了一系列Bi2WO6/Zn O异质结光催化剂,并对其进行X射线衍射(XRD)、紫外-可见光谱(UV-Vis DRS)、扫描电镜(SEM)、光电子能谱(EDS)等手段对其结构性质进行了表征。在含酚废水的液相反应体系中,研究了异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的性能。结果表明,Bi2WO6/Zn O异质结的形成可以有效的抑制光生电子和空穴对的结合,使其光催化活性明显优于纯的Zn O和Bi2WO6;另外,异质结型Bi2WO6/Zn O复合光催化剂的表面OH·自由基更有利于光催化活性的提高。当Bi2WO6复合量为4wt%时,异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的效果最佳。     

具有双螺旋链结构的3-吡啶丙烯酸镝配合物的水热合成及晶体结构

采用水热法制备了一种新型稀土配位聚合物[Dy(3-PA)3(H2O)]n(3-PA=3-吡啶丙烯酸)(1),并通过X射线单晶衍射结构分析、元素分析、红外光谱、热重分析对配合物1进行了结构表征.结构分析表明,标题配合物属于三斜晶系,Pī空间群,晶胞参数为:a=0.617 16(5)nm,b=1.270 45(11)nm,c=1.564 03(13)nm,α=111.557 0(10)°,β=90.307 0(10)°,γ=95.342 0(10)°,V=1.134 54(16)nm3,Z=2.金属离子Dy(III)通过配体3-AP羧基的桥联作用,链接成为一维双螺旋链状配位聚合物.     

Multipore Zeolites: Synthesis and Catalytic Applications

In the last few years, important efforts have been made to synthesize so‐called “multipore” zeolites, which contain channels of different dimensions within the same crystalline structure. This is a very attractive subject, since the presence of pores of different sizes would favor the preferential diffusion of reactants and products through those different channel systems, allowing unique catalytic activities for specific chemical processes. In this Review we describe the most attractive achievements in the rational synthesis of multipore zeolites, containing small to extra‐large pores, and the improvements reported for relevant chemical processes when these multipore zeolites have been used as catalysts.     

Synthesis,Crystal Structure and Property of CuPb2(OH)2Cl3

A new copper(I)-lead(II) oxyhalide, Cu Pb2(OH)2Cl3, has been prepared by hydrothermal reaction and structurally characterized by single-crystal X-ray analysis. The compound crystallizes in tetragonal, space group I4(1)/acd with a = b = 13.77(1), c = 15.38(1) , V = 2916.2(2), Z = 4, Mr = 618.29, Dc = 5.633 g/cm3, μ = 49.97(2) mm-1, F(000) = 4192, the final R = 0.0204 and w R = 0.0452 for 757 observed reflections with I 2σ(I). The structure of Cu Pb2(OH)2Cl3 contains one-dimensional helical chains built by Cu Cl4 tetrahedra with corner-sharing along the c-axis, in which the Pb2+ and OH- ions are located at the voids between chains. Optical reflectance spectrum measurements indicate that it is a semiconductor with a band-gap of 3.23 e V.     

Hydrothermal Syntheses and Crystal Structures of Two Complexes of Cobalt and Manganese Assembled by 4,4'-Oxydibenzoic Acid

Two new coordination polymers [Co(oba)(mbix)]2n·n H2O(1) and [Mn(Hoba)2(H2O)2]n(2)(H2oba = 4,4'-oxydibenzoic acid, mbix = 1,3-bis(imidazol-1-ylmethyl)benzene) have been successfully synthesized under hydrothermal conditions. Their structures have been determined by elemental analyses, IR spectroscopy, UV and single-crystal X-ray diffraction analysis. The intermolecular hydrogen bonding and π-π stacking interactions extend the complexes into a 3D supramolecular structure.     

退火处理提高P3HT:PCBM聚合物太阳能电池光伏性能

利用旋转涂膜方法制备了以P3HT:PCBM为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT:PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝),研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C退火10 min处理后, 开路电压(V_oc)达到0.64 V, 短路电流密度(J_sc)为10.25 mA·cm^-2, 填充因子(FF) 38.1%, 光电转换效率(PCE)达到2.00%. 为了讨论其内在机制, 对不同退火条件下聚合物薄膜进行了各种表征. 从紫外-可见吸收光谱中发现, 退火处理使P3HT在可见光范围内吸收加强且吸收峰展宽, 特别是在560和610 nm处的吸收强度明显增大; X射线衍射(XRD)结果表明, 120 °C退火后P3HT在(100)晶面上的衍射强度是未退火薄膜的2.8倍, 有利于光生载流子的输运; 原子力显微镜(AFM)研究结果表明, 退火显著增大了P3HT与PCBM的相分离程度, 提高了激子解离的几率; 傅里叶变换红外(FTIR)光谱验证了退火并没有引起聚合物材料物性的变化.     

Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

Effect of a topical formulation containing Calophyllum brasiliense Camb. extract on cutaneous wound healing in rats

This study evaluated the wound healing effects of topical application of an emulsion containing the HPLC-standardised extract from Calophyllum brasiliense Cambess (Clusiaceae) leaves in rats. The macroscopic analysis demonstrated that the wounds treated with the C. brasiliense emulsion healed earlier than the wounds treated with emulsion base and Dersani®. The percentage of wound healing in the group treated with the C. brasiliense emulsion was significantly higher than in the other groups at 7 and 14 days. On day 14, the animals treated with the C. brasiliense emulsion exhibited a 90.67% reduction of the wound areas. The histological evaluation revealed that on day 21, the group treated with the C. brasiliense emulsion exhibited a significant increase in fibroblasts compared with the other groups. Thus, the C. brasiliense emulsion had healing properties in the topical treatment of wounds and accelerated the healing process.